One 4WD 3 Pack

749,-

One 4WD 3 Pack, 495g totalt.  One Ball's most popular line of wax, the 4WD wax, is your go to everyday super fast wax. This hydrocarbon blended wax is fast and consistent. With this pack, you get the warm, cool, and cold bricks (see temp  4WD Warm, Cool/All Temp, Cold 165g x 3 = 495 grams 165g of Each Bar High performance hydrocarbon For best application: Iron, scrape, polish No fluro chemicals Low humidity 45%> Snow Temperature Range Cold 21°F to 5°F(-5°C to -15°C) Cool 28°F to 21°F(-2°C to -6°C) Warm 32°F to 28°F(0°C to -2°C)

På lager

One 4WD Cold (-6 to -15C)

299,-

One 4WD Cold er en voks som er egnet for temperaturer rundt -6C til -15C. Her får du en høgkvalitets voks til en god pris. Flourfritt! Our 4WD Cold Temperature Snowboard and Ski Wax is a great all purpose wax at a great price. Race-proven formulas using the highest quality of hydrocarbon waxes. No additives. Contains no flouro. Size: 165g Hot Waxing: Base must be clean and dry. Hot wax your base with the temperature specific wax for best results. Let wax cool completely and scrape with a plastic scraper. Brush out remaining wax from base and polish smooth.

På lager

One 4WD Cool (-2 to -6C)

299,-

One 4WD Cool er en voks for temperaturer rundt -2C til -6C, men fungerer i et mye bredere spekter. Her får du en høgkvalitets, universal, alle temperaturer voks til en god pris. Flourfritt! Our 4WD Cool / All Temperature / Universal Snowboard and Ski Wax is an awesome all purpose wax at a great price. Race-proven formulas using the highest quality of hydrocarbon waxes.  No additives. Contains no flouro. Size: 165g NO FLUORO: No Fluoro, PTFE, (PFAS), also known as "forever chemicals" any kind used. No micro Plastics. No surfactants. All the speed without the environmental and health concerns. Hot Waxing: Base must be clean and dry. Hot wax your base with the temperature specific wax for best results. Let wax cool completely and scrape with a plastic scraper. Brush out remaining wax from base and polish smooth. MADE IN-HOUSE: At the headquarters factory located in Belfair Washington USA. Since 1986 One Mfg, Oneball, OneballJay has formulated and manufactured their own waxes and accessories. HISTORY: In 1986 OneBall, Oneballjay, One Mfg introduced to the world the first snowboard specific wax. Since then they have developed some of the fastest snowboard and ski waxes in the world. Winning more events and races than imaginable from the Mt. Baker Banked Slaloms, X-Games and Olympic gold! In-House Factory Made! Always Innovate! Enjoy The Speed!

På lager

One Eco Recycled Wax universal

299,-

EcoLeaf er en universal voks som passer for alle temperaturer. Den er lagd 100% av resirkulert voks fra produksjonen til andre produkter hos legendariske Oneball.  Made with 100% recycled hydrocarbon ski and snowboard wax from our factory! It is 100% recycled from scraps that we have during wax production. An excellent blend for hot waxing or as a rub-on wax. This is a premium, universal, all temperature alpine wax. Comes in assorted colors. Optimal Temperature: 28ºF to 21ºF (-2ºC to -6ºC) Size: 100g Hot Waxing: Base must be clean and dry. Hot wax your base with the temperature specific wax for best results. Let wax cool completely and scrape with a plastic scraper. Brush out remaining wax from base and polish smooth. Rub On: Apply wax to base by hand and cover completely. Use a waxing cork to polish wax into base with firm pressure. A scraper can be used and then use a waxing brush to polish the base... horse hair brush is best for this.

På lager

One F-1 Rub On Wax - All Temp

299,-

Trenger du en voks som kan påføres raskt når du allerede er på fjellet? Da er dette noe for deg. F1 Rub-On for alle temperaturer. Fra legendariske Oneball.  This F1 Rub-On, All-Temperature Ski / Snowboard Wax comes in a snap top plastic case a with cork applicator on the base of the container. Once you rub the wax into the base polish it using the cork applicator for fast, rub in performance. This is a great universal alpine wax to carry in your jacket and apply in between runs.  Temperature Range: 28ºF to 21ºF (-2ºC to -6ºC) Size: 85g Rub On: Apply wax to base by hand and cover completely. Use a waxing cork to polish wax into base with firm pressure. A scraper can be used and then use a waxing brush to polish the base... horse hair brush is best for this.

På lager

One Maiden Scraper

199,-

One Maiden scraper er en triangelformet sikling, 15,2cm lang på sidene. Den er lagd av akryl og har skarpe kanter.  This 6-inch, triangle shaped, acrylic, super-sharp snowboard wax scraper allows you to get good hold of it for maximum leverage for clearing wax off your board! All our plastic scrapers are made of high grade acrylic because it is extremely sharp. If your scraper has wax build up or gotten dull, you can run it over a steel file or sandpaper to clean it off and get a fresh sharp edge on it. Notched corner allows you to easily remove wax from your edges.  6" triangle x 1/8" thick Instructions: 1. Select correct temperature specific wax by checking mountain conditions/snow report... (actual snow temperature, not air). 2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE! 3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip-to-tail. 4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper. 5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast.

På lager

One Walter Wax - All temp

265,-

Walter Wax fra One er en del av shapeshifters serien deres. Her får du den deilige duften av kaffe når du prepper brettet! Voksen passer for alle temperaturer og den passe særdeles godt som en gave til enhver ekte snowboarder, eller til alle som har et forhold til Walter.  Shut the f@%k up Donnie! You're out of your element! This ski and snowboard wax is part of our shape shifter line of all temperature, universal alpine waxes. Great for hot waxing or as a rub-on wax. Smells like cinnamon coffee! Size: 130g Hot Waxing: Base must be clean and dry. Hot wax your base with the temperature-specific wax for best results. Let wax cool completely and scrape with a plastic scraper. Brush out remaining wax from base and polish smooth. Rub On: Apply wax to base by hand and cover completely. Use a waxing cork to polish wax into base with firm pressure. A scraper can be used and then use a waxing brush to polish the base...horse hair brush is best for this. Instructions:  1. Clean board surface and dry completely. Use ONE MFG Base Cleaner, rubbing alcohol, or another solvent may be needed to get off dirt. Let the solvent dry for 10 minutes.  2. Mark area where pad will be placed with pencil first. Peel off backing of pad. Place stomp pad in front of your back foot binding and center edge to edge. 3. Only stick once, do not move, making sure not to damage adhesive. Use your fingers to press on pad with firm pressure. Use a hair dryer or heat source to help the pad stick if you want.  4. Let stomp pad adhere to board for a minimum of 12 hours before using. Better yet, bring your board inside your home and let the stomp pads rest overnight.  We mold and produce this pad in our Belfair Factory!

På lager